The selection of solid wood furniture manufacturers products
1. Classification of solid wood furniture
(1) All solid wood furniture
Generally refers to a certain tree species as the main material, corner and other unimportant parts with other cheaper tree species or solid wood board as auxiliary materials of furniture.
Of course, different wood furniture, the price is also a huge difference. Expensive solid wood furniture is certainly mahogany, tens of thousands to millions of prices are possible. Among the wood materials used by solid wood furniture manufacturers, oak, walnut, cherry and so on are relatively good; Fraxinus mandshurica, beech and birch are medium; And rubber wood, pine, fir are generally cheap.
(2) Solid wood furniture
Refers to all materials are from the same kind of tree processing furniture. This kind of furniture refers to 100% solid wood, without the use of density board and solid wood particle board and other boards. This kind of furniture is very rare. In addition to the high cost mahogany furniture on the market, it is generally all solid wood furniture with mixed main and auxiliary materials.
(3) Board wood furniture
Board wood furniture refers to the furniture structure using solid wood frame, the surface part using a variety of density boards, the contact surface using a variety of exquisite solid wood veneer, board wood mixed furniture.
The combination of board and wood just takes into account the gravity that the solid wood can bear and the characteristics that the MDF is not easy to deform, and the cost is relatively cheap. Because of the combination of wood and board, all solid wood furniture can adapt to different climate, such as dry or wet, etc.
2. Judge the nature of solid wood
Most of the solid wood has wood fragrance, pine has rosin smell, camphor wood has obvious camphor smell... But fiberboard and density board will have strong pungent smell, especially in the cabinet door or drawer.
3. Check polishing quality
Put your hand on the surface of the furniture, carefully check whether the polished surface is smooth, pay special attention to whether the foot of the table and other parts are rough, whether there are streaks in the paint, whether the paint at the corner is too thick, whether there are cracks or bubbles.
4. Observe the quality of wood
The main stressed parts of furniture, such as columns and load-bearing bars connecting columns close to the ground, should not have large knots or cracks. The frame shall not be loose, and the tenon and material shall not be broken. The components of wood-based panels used by solid wood furniture manufacturers should be edge sealed, and all kinds of accessories should be installed with no less pieces, missing nails and through nails.
5. Check stability
Wooden furniture should have stable performance. When the two cabinet doors are opened 90 degrees, gently pull them forward by hand, and the cabinet can't automatically tip forward; The glass of bookcase door should be polished; Mirror to install back plate, and the glass surface fixed. Small pieces of furniture such as chairs, stools, hangers, etc. in the selection may wish to drag on the ground, gently drop, if the sound is crisp, that furniture production process and quality is better; If the voice is dumb, there is a crackling noise, indicating that the mortise joint is not tight.
6. Check the details carefully
Solid wood furniture is mainly divided into traditional and modern. Traditional hardwood furniture generally has no paint layer on its surface, but is only waxed. Now the new hardwood or other solid wood furniture surface has big paint or varnish protection.
